<form id="3hnhd"><th id="3hnhd"><th id="3hnhd"></th></th></form>

    <noframes id="3hnhd"><form id="3hnhd"></form>
    <address id="3hnhd"><listing id="3hnhd"><progress id="3hnhd"></progress></listing></address>

      Wellcome To Wotboy Intelligent Equipment Co.,Ltd.!

      Horizontal standard machine

       MT-GK Horizontal standard machine

      Control unit
      Based on the data of Japanese star novel high speed and high precision control of the main pressure requirements all within the monitoring, all available in your hands,

       high degree of automation of the machine and fully guarantee the you need products stable and precise forming requirement;

      The main action units are controlled by Italy electronic scale and pressure sensor.

      Service Hotline:0769-87896501
      Finished Product
      • Product Details
      • Product Data

      Control unit
      Based on the data of Japanese star novel high speed and high precision control of the main pressure requirements all within the monitoring, all available in your hands, high degree of automation of the machine and fully guarantee the you need products stable and precise forming requirement;
      The main action units are controlled by Italy electronic scale and pressure sensor.
        

      Control unit
      Based on the data of Japanese star novel high speed and high precision control of the main pressure requirements all within the monitoring, all available in your hands, high degree of automation of the machine and fully guarantee the you need products stable and precise forming requirement;
      The main action units are controlled by Italy electronic scale and pressure sensor.
       Injection unit
      The design of single cylinder injection. Oil pressure cylinder and the circuit board into one, in addition to a substantial reduction of oil spills, and to reduce the response delay time.
      Low speed and high torque hydraulic motor control screw drive, feeding and stability, injection pressure from the sensor feedback to achieve semi closed precision control, thus ensuring accurate shooting

      Locking element
      The design of direct pressure clamping, clamping force can be fully and evenly distributed;
      The hydraulic system uses the high precision servo system, with the special oil circuit and the hydraulic oil tank circuit design, to ensure the low energy consumption and fast action;
      Hydraulic lock mould system is equipped with a pressure sensor, the realization of the high precision semi closed control, low pressure mold protection, and protect mold position very short (by a semi closed valve and a pressure sensor for Disease Control), because of the precision of high-pressure position so it can saving time pressure and without special mould adjusting, you only need to easily in the computer setting a low voltage lock mode position can be automatic calculation of pressure, clamping position with high repeatability.
      Other
      The suction nozzle is the self sealing type magnetic suction strainers, ensure the cleanliness of hydraulic oil. If the cartridge is pollution and blockage of oil to the mouth of the vacuum degree is 0.018Mpa will be issued an alert
      The allocation of oil temperature alarm device, when the oil temperature exceeds the maximum value when the alarm signal and automatically shutdown; 

      項目 
      單位
      TS170
      TS290
      TS450
      射出單元  
      螺桿直徑
      mm
      40
      45
      50
      45
      50
      56
      50
      56
      65
      理論射出容積 
      cm3
      289
      366
      452
      390
      481
      603
      481
      603
      813
      射出重量 
      g
      273
      346
      427
      368
      455
      570
      455
      570
      768
      射出壓力
      kgf/cm2
      2628
      2076
      1682
      2353
      1906
      1519
      2527
      2015
      1495
      螺桿長徑比 
      L/D
      21.5
      19.1
      17.2
      20.6
      18.5
      16.5
      21.6
      19.3
      16.6
      射出速度 
      mm/sec
      150
      150
      150
      射出率 
      cm3/sec
      螺桿轉速 
      rpm/sec
      238
      294
      257
      238
      294
      369
      294
      369
      499
      可塑化重量 
      kg/hr
      164
      160
      142
      料斗容量 
      KG
      62
      84
      115
      66
      102
      132
      82
      131
      167
      50
      100
      100
      鎖模單元 
      閉模力
      Ton
      200
      250
      450
      開模力 
      Ton
      6.5
      9.1
      19.8
      鎖模行程 
      mm
      610
      710
      960
      最小模厚
      mm
      200
      220
      260
      開模最大距離 
      mm
      大柱內距 
      mm
      810
      930
      1220
      頂出力 
      Ton
      470*470  
      520*520  
      670*670  
      頂針行程 
      mm
      8.8
      8.8
      13.7
      頂針數 
      P.C.S.
      150
      200
      200
      5
      5
      13
      電力 / 其他 
      電熱容量 
      KW
      9.45
      11.25
      18.3
      溫度控制段數 
      Zone
      Nozzle+3
      Nozzle+3
      Nozzle+4
      電機功率 
      KW
      15
      22
      30
      油箱容量 
      L
      390
      416
      590
      機械重量 
      Ton
      5.8
      7.4
      12.4
      機械尺寸(長*寬*高)
      mm
      4.96*1.14*1.53
      5.5*1.24*1.74
      6.53*1.53*1.81

      Contact us

      Dongguan Wotboy Intelligent Equipment Co.,Ltd.

      Tel:0769-87896501   Fax:0769-87896503

      Email:baina@bainajx.com

      Address:Dongguan Suyin Qingxi Town of third road management areas


      • 掃碼關注公眾號

      • 博川手機站
      奔驰宝马游戏app