<form id="3hnhd"><th id="3hnhd"><th id="3hnhd"></th></th></form>

    <noframes id="3hnhd"><form id="3hnhd"></form>
    <address id="3hnhd"><listing id="3hnhd"><progress id="3hnhd"></progress></listing></address>

      Wellcome To Wotboy Intelligent Equipment Co.,Ltd.!

      Horizontal two-color machine

      Using the latest high - stress - machine interface operating system of OMRON, and the software program, it has a good human-computer interaction performance.
      The hydraulic system adopts BOSCH large flow rate, half closed proportional valve with high response and precision half closed control. The whole system has the characteristica of high response.low noise and energy comsumption.

      The whole machine is a modular desing,the two sets of independentinjection system,accotding to the characteristics of plastic products for a variety of combinatios collecation,injechtion products range is very wide;

      High percision rotating mode device,double station180degrees reciprocating rotation.the use of servo motor drive,shift mode fast,stable,smooth smooth accurate;

      Two sets of independent proportional pressure/flow control circuit,control two sets of injection system and ejection system.according to the characteristics of plastic products,flexible and changeable set up the optimization of injection molding process,to ensure the quality of injection molding products,the end of the end of the cycle,and thus have a stronger market compititiveness.

      Rotary table design,patricularly suitable for:single side cover injection molding"of the dual color plastic products,but also to use two sets of orkinary mold(mold thicknessas)at the same time to produce two different monochrome plastic products.


      Service Hotline:0769-87896501
      Finished Product
      • Product Details
      • Product Configuration
      • Product Data

      Using the latest high - stress - machine interface operating system of OMRON, and the software program, it has a good human-computer interaction performance.
      The hydraulic system adopts BOSCH large flow rate, half closed proportional valve with high response and precision half closed control. The whole system has the
      characteristics of high response, low noise and energy consumption.
      The whole machine is a modular design, the two sets of independent injection system, according to the characteristics of plastic products for a variety of combinations collocation, injection products range is very wide.
      High precision rotating mode device, double station 180 degrees reciprocating rotation, the use of servo motor drive, shift mode fast, stable, smooth, smooth, accurate.
      Two sets of independent proportional pressure / flow control circuit, control two sets of injection system and ejection system, according to the characteristics of plastic products, flexible and changeable set up the optimization of injection molding process, to ensure the quality of injection molding products, the end of the cycle, and thus have a stronger market competitiveness.
      Rotary table design, particularly suitable for "single side cover injection molding" of the dual color plastic products, but also to use two sets of ordinary mold (mold thickness
      as) at the same time to produce two different monochrome plastic products.

      When the firing rate of 201~280mm/s injection oil must be promoted to the high reaction direction control valve
      When the firing rate of 281~800mm/s injection circuit must enhance control servo valve;
      If you do not choose the servo valve, speed will be limited to less than 280mm/s.
      We reserve the right to make changes as a result of further technical advantages.

      Model
      Company
      CQL-180-2C
      CQL-330-2C
      CQL-430-2C
      The clamping device
      Selection lnjection system
      Series NO.
      主射膠系統
      副射膠系統
      主射膠系統
      副射膠系統
      主射膠系統
      副射膠系統
      A.B C
      A.B
      B.C.D.E
      A.B.C.D
      C.D.E.F
      B.C.D.E
      Clamping foce
      kN(tf)
      1764(180)
      3234(330)
      4124(430)
      Claming stroke
      mm
      600
      85
      950
      Minimum mold thickness
      mm
      220
      280
      350
      The maximum opening distanc
      mm
      820
      1130
      1300
      Column spacing(L*W)
      mm
      530*630
      730*750
      750*980
      The maximum size of the mold
      mm
      550*550
      620*620
      845*845
      The maximum size of the mold
      KG
      800
      1000
      1600
      Wheel diameter
      mm
      ф780
      ф980
      1200
      Finshed top of the distance
      mm
      150
      180
      200
      EJection
      kN(tf)
      59(6)
      78.5(8)
      122.5(12.5)
      Other
      System pressure
      MPA(kgf/cm2)
      17.5(175)
      17.2(175)
      17.2(175)
      Fuel tank capacity
      L
      400
      780
      930
      Motor Power
      KW(HP)
      30(40)
      45(60)
      55(75)
      Mechanical Dimensions
      mm
      5668*2935*2130
      7610*3795*2420
      8215*4395*2670
      Machine weight
      tf
      13
      24.5
      34Primary injection systemPrimary injection system
      Model
      Company
      A
      B
      C
      D
      E
      F
      CQL-2C(The injection device
      Screw diameter
      mm
      Φ25
      Φ30
      Φ35
      Φ30
      Φ35
      Φ40
      Φ35
      Φ40
      Φ45
      Φ40
      Φ45
      Φ50
      Φ45
      Φ50
      Φ55
      Φ60
      Φ65
      Φ70
      Theoretical injection volume
      cm3
      69
      99
      135
      113
      154
      201
      154
      350
      432
      276
      350
      432
      381
      471
      570
      848
      995
      1154
      Injection molding quality (PS)
      g(oz)
      64(2.2)
      93(3.2)
      126(4.4)
      105(3.7)
      143(5)
      187(6.6)
      143(5)
      187(6.6)
      236(8.3)
      257(9)
      325(11.5)
      402(14)
      335(12.5)
      438(15.4)
      530(18.6)
      788(27.8)
      925(32.6)
      1073(37.8)
      Plastic ability
      g/s
      6
      9
      15
      12.3
      18.8
      26.8
      15
      21.4
      27.6
      21.4
      27.6
      35.2
      18.6
      23.7
      29.1
      37.4
      45.4
      54.5
      Injection rate
      cm3/s
      286(2912)
      198(2022)
      146(1485)
      267(2722) 
      196(2000)
      150(1530)
      245(2494)
      193(1970)
      156(1596)
      245(2494)
      193(1970)
      156(1596)
      244(2489)
      198(2016)
      163(1666)
      198(2022)
      169(1723)
      146(1486)
      Injection rate
      mm/s
      COL180-2C/179   
      CQL180-2C/ 133  
       
      CQL330-2C /  259
      CQL330-2C/ 159
      CQL430-2C / 187
      CQL330-2C / 159
      CQL430-2C/ 187
      CQL330-2C/ 126
      CQL430-2C /  148
      CQL430-2C   / 88
      Maximum injection pressure
      Mpa(kgf/cm2)
      COL180-2C / 123  
      COL330-2C/225
      CQL180-2C     91
      CQL-2C 167 
      CQL430-2C 210
      CQL330-2C/103
      CQL430-2C /129
      CQL330-2C / 103
      CQL430-2C/129
      CQL330-2C /  102
      _______
      Screw speed
      r.p.m
      0~240
      0~300
      0~240
      0~240
      0~160
      0~160
      Nozzle projecting template size
      mm
      ≥45
      ≥45
      ≥45
      ≥45
      ≥45
      ≥45
      Electric heating power
      kw
      5.7
      6.9
      10
      12.1
      13
      21

      Contact us

      Dongguan Wotboy Intelligent Equipment Co.,Ltd.

      Tel:0769-87896501   Fax:0769-87896503

      Email:baina@bainajx.com

      Address:Dongguan Suyin Qingxi Town of third road management areas


      • 掃碼關注公眾號

      • 博川手機站
      奔驰宝马游戏app