<form id="3hnhd"><th id="3hnhd"><th id="3hnhd"></th></th></form>

    <noframes id="3hnhd"><form id="3hnhd"></form>
    <address id="3hnhd"><listing id="3hnhd"><progress id="3hnhd"></progress></listing></address>

      Wellcome To Wotboy Intelligent Equipment Co.,Ltd.!

      Horizontal two-color machine

      Using the latest high - stress - machine interface operating system of OMRON, and the software program, it has a good human-computer interaction performance.
      The hydraulic system adopts BOSCH large flow rate, half closed proportional valve with high response and precision half closed control. The whole system has the;
      Service Hotline:0769-87896501
      Finished Product
      • Product Details
      • Product Data
      Using the latest high - stress - machine interface operating system of OMRON, and the software program, it has a good human-computer interaction performance.
      The hydraulic system adopts BOSCH large flow rate, half closed proportional valve with high response and precision half closed control. The whole system has the
      characteristics of high response, low noise and energy consumption.
      The whole machine is a modular design, the two sets of independent injection system, according to the characteristics of plastic products for a variety of combinations collocation, injection products range is very wide.
      High precision rotating mode device, double station 180 degrees reciprocating rotation, the use of servo motor drive, shift mode fast, stable, smooth, smooth, accurate.
      Two sets of independent proportional pressure / flow control circuit, control two sets of injection system and ejection system, according to the characteristics of plastic products, flexible and changeable set up the optimization of injection molding process, to ensure the quality of injection molding products, the end of the cycle, and thus have a stronger market competitiveness.
      Rotary table design, particularly suitable for "single side cover injection molding" of the dual color plastic products, but also to use two sets of ordinary mold (mold thickness
      as) at the same time to produce two different monochrome plastic products.
      Model
      Company
      CQ170-2C
      CQ250-2C
      CQ290-2C
      Note1
      Note 2
      Note 1
      Note 2
      Note1
      Note 2
      INJECTION UNIT
      A
      B
      C
      A
      B
      C
      A
      B
      C
      A
      B
      C
      A
      B
      C
      A
      B
      C
      Screw Diameter
      mm
      32
      36
      40
      26
      30
      34
      40
      45
      50
      32
      36
      40
      40
      45
      50
      32
      36
      40
      Shot Size (Theoretical)
      L/D
      22.5
      20
      18
      24
      21
      19
      22.5
      20
      18.8
      21.5
      20
      18
      22.5
      20
      18.8
      21.5
      20
      18
      Injection Weight(PS)
      cm3
      122
      155
      191
      66
      88
      113
      251
      318
      393
      122
      155
      191
      251
      318
      393
      122
      155
      191
      Injection Rate
      g
      111
      141
      174
      60
      80
      103
      228
      289
      358
      111
      141
      174
      228
      289
      358
      111
      141
      174
      Injection Pressure
      g/s
      76
      96
      118
      61
      81
      104
      111
      141
      174
      75
      95
      117
      111
      141
      174
      75
      95
      117
      Plasticizing Capacity(ps)
      MPa
      225
      178
      144
      237
      178
      138
      225
      178
      144
      225
      178
      144
      225
      178
      144
      225
      178
      144
      Screw Speed
      g/s
      10
      11.6
      14
      7.8
      12.7
      17
      18.9
      25
      34
      10
      11.6
      14
      18.9
      25
      34
      10
      11.6
      14
      CLAMPING UNIT
      rpm
      0~240
      0~285
      0~210
      0~240
      0~210
      0~240
      Clamp Tonnage
      TON
      170
      250
      290
      Toggle Stroke
      mm
      420
      540
      590
      Space Between Tie Bars
      mm
      455X455
      570X570
      630X630
      Max.Mold Height
      mm
      485
      570
      630
      Min.Mold Height
      mm
      165
      220
      230
      Ejector Stroke
      mm
      120
      120
      70
      Ejector Number
      KN
      14X2
      28X2
      22X4
      Core AxisStroke
      PC
      1X2
      1X2
      2X2
      CoreAxiaTonnage
      mm
      120
      120
      120
      DistanceBetween Molds Positing Centers
      KN
      33
      46
      46
      OTHERS
      mm
      25
      300
      300
      Max.PumpPressure
      11
      16
      7.5
      15
      16
      11
      15
      16
      11
      Pump MotorPower
      MPa
      9.9
      5.1
      12.25
      9.9
      12.25
      9.9
      Heater Power
      KW
      Machine Weight
      KW
      25
      5.5
      25
      25
      10
      25
      25
      11
      25
      Hopper Capacity
      t
      OilTankCapacity
      KG
      281
      384
      545

      Contact us

      Dongguan Wotboy Intelligent Equipment Co.,Ltd.

      Tel:0769-87896501   Fax:0769-87896503

      Email:baina@bainajx.com

      Address:Dongguan Suyin Qingxi Town of third road management areas


      • 掃碼關注公眾號

      • 博川手機站
      奔驰宝马游戏app