<form id="3hnhd"><th id="3hnhd"><th id="3hnhd"></th></th></form>

    <noframes id="3hnhd"><form id="3hnhd"></form>
    <address id="3hnhd"><listing id="3hnhd"><progress id="3hnhd"></progress></listing></address>

      Wellcome To Wotboy Intelligent Equipment Co.,Ltd.!

      Horizontal injection press

      MT-GK Horizontal standard machine

      Based on the data of Japanese star novel high speed and high precision control of the main pressure requirements all within the monitoring, all available in your hands,

      high degree of automation of the machine and fully guarantee the you need products stable and precise forming requirement;

      The main action units are controlled by Italy electronic scale and pressure sensor.

      Service Hotline:0769-87896501
      Finished Product
      • Product Details
      • Product Data
      Control unit
      Based on the data of Japanese star novel high speed and high precision control of the main pressure requirements all within the monitoring, all available in your hands, high degree of automation of the machine and fully guarantee the you need products stable and precise forming requirement;
      The main action units are controlled by Italy electronic scale and pressure sensor.
       Injection unit
      The design of single cylinder injection. Oil pressure cylinder and the circuit board into one, in addition to a substantial reduction of oil spills, and to reduce the response delay time.
      Low speed and high torque hydraulic motor control screw drive, feeding and stability, injection pressure from the sensor feedback to achieve semi closed precision control, thus ensuring accurate shooting
       
      Locking element
      The design of direct pressure clamping, clamping force can be fully and evenly distributed;
      The hydraulic system uses the high precision servo system, with the special oil circuit and the hydraulic oil tank circuit design, to ensure the low energy consumption and fast action;
      Hydraulic lock mould system is equipped with a pressure sensor, the realization of the high precision semi closed control, low pressure mold protection, and protect mold position very short (by a semi closed valve and a pressure sensor for Disease Control), because of the precision of high-pressure position so it can saving time pressure and without special mould adjusting, you only need to easily in the computer setting a low voltage lock mode position can be automatic calculation of pressure, clamping position with high repeatability.
      Other
      The suction nozzle is the self sealing type magnetic suction strainers, ensure the cleanliness of hydraulic oil. If the cartridge is pollution and blockage of oil to the mouth of the vacuum degree is 0.018Mpa will be issued an alert
      The allocation of oil temperature alarm device, when the oil temperature exceeds the maximum value when the alarm signal and automatically shutdown; 
      project
      Company
      TS120
      TS200
      TS250
      TS320
      TS650
      Injection unit
      Screw diameter
      mm
      32
      36
      40
      40
      45
      50
      45
      50
      56
      50
      56
      65
      72
      80
      90
      Injection capacity
      cm3
      101
      127
      157
      289
      366
      452
      390
      481
      603
      481
      603
      813
      1507
      1861
      2356
      Injection weight(P.S) 
      g
      95
      120
      148
      273
      346
      427
      368
      455
      570
      455
      570
      768
      1424
      1759
      2226
      Injection pressure
      kgf/cm2
      2670
      2110
      1709
      2628
      2076
      1682
      2353
      1906
      1519
      2527
      2015
      1495
      2042
      1654
      1307
      Length/Diameter ratio
      L/D
      20.6
      18.3
      16.5
      21.5
      19.1
      17.2
      20.6
      18.5
      16.5
      21.6
      19.3
      16.6
      24.3
      21.9
      19.4
      Injection speed 
      mm/sec
      150
      150
      150
      150
      150
      Injection rate
      cm3/sec
      Screw speed
      rpm/sec
      121
      153
      188
      238
      294
      257
      238
      294
      369
      294
      369
      499
      610
      754
      950
      Plasticizing capacity(P.S) 
      kg/hr
      188
      164
      160
      142
      115
      Hopper capacity
      KG
      33
      45
      62
      62
      84
      115
      66
      102
      132
      82
      131
      167
      182
      256
      325
      25
      50
      100
      100
      100
      Clamping unit
      Mold clamping force
      Ton
      120
      200
      250
      450
      650
      Mold opening force
      Ton
      3.8
      6.5
      9.1
      19.8
      21
      Mold clamping stroke
      mm
      465
      610
      710
      960
      1260
      Min.mold thickness
      mm
      180
      200
      220
      260
      390
      Max.mold thickness
      mm
      Distance between tie bars
      mm
      645
      810
      930
      1220
      1650
      Ejector force
      Ton
      370*370  
      470*470  
      520*520  
      670*670  
      910*910
       
      Ejector stroke
      mm
      3.4
      8.8
      8.8
      13.7
      15
      Ejector quantity
      P.C.S.
      150
      150
      200
      200
      250
      5
      5
      5
      13
      21
      Other
      Heater band capacity
      KW
      7.65
      9.45
      11.25
      18.3
      33
      No.of heating zones 
      Zone
      Nozzle+3
      Nozzle+3
      Nozzle+3
      Nozzle+4
      Nozzle+4
      Electric motor 
      KW
      11
      15
      22
      30
      75
      Oiltankcapacity 
      L
      265
      390
      416
      590
      1000
       
      Machineweight 
      Ton
      3.5
      5.8
      7.4
      12.4
      24.8
      Machinedimension(L*W*H)
      mm
      3.8*1.02*1.46
      4.96*1.14*1.53
      5.5*1.24*1.74
      6.53*1.53*1.81
      9.6*2.1*2.31

      Contact us

      Dongguan Wotboy Intelligent Equipment Co.,Ltd.

      Tel:0769-87896501   Fax:0769-87896503

      Email:baina@bainajx.com

      Address:Dongguan Suyin Qingxi Town of third road management areas


      • 掃碼關注公眾號

      • 博川手機站
      奔驰宝马游戏app